Extech AN100 CFM CMM Mini Thermo-Anemometer
Deskripsi Extech AN100 CFM/CMM Mini Thermo Anemometer
Extech AN100 CFM/CMM Mini Thermo Anemometer
Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
Easy to set Area dimensions (cm2) are stored in the meter's internal memory for the next power on
3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
The Extech AN100 is used to accurately measure air flow, air velocity and ambient temperature and includes simultaneous display of flow/velocity plus temperature at the same time.
To carry out measurements the AN100 uses a built-in vane sensor which is equipped to the main testing unit via a 3.9ft (120cm) cable. This enables the user to easily position the vane inside difficult areas such as ducts, but this product can also be used for a wide variety of different applications including HVAC installation, repair, diagnostics and optimisation, fume hood testing, installation and verification, environmental wind and temperature testing, boiler rooms, ioniser flow output monitoring and much more.
When measuring air velocity the AN100 features the ability to measure in different units. These are: 0.40 to 30.00 m/s, 1.4 to 108.0 km/h, 80 to 5906 ft/min, 0.9 to 67.2 mph and 0.8 to 58.3 knots. The device can also measure CMM and CFM airflow levels and can measure temperature of the air from 14 to 140F (-10 to 60C).
Extech AN100 CFM/CMM Mini Thermo Anemometer Key Features
Simultaneously display of ambient temperature plus an air flow/velocity value
8 easy to set area dimensions are stored in devices' internal memory
Multiple measurements modes for air velocity
CFF and CMM air flow measurements
20 point average function for air flow measurements
Large size backlit LCD display
Vane attached by 3.9ft (120cm) cable